Board logo

Airbox for Throttle bodies
phoenix70 - 19/2/09 at 01:13 PM

Well after hunting for a while I managed to get a airbox for my GPZ1100 TB's but it doesn't fit in the space available, so I took the trumpets out, and they won't fit either, so I've decided to make an airbox from scratch, but the one area I'm not sure about is sealing the airbox around the TB's. I had thought about using rubber grommets, but I can't find any big enough. Looking for idea on solving this (P.S. the TB's are 40mm O/D)

Cheers

Scott

mangogrooveworkshop - 19/2/09 at 01:21 PM

Scott get some really big diameter ali bar and we can turn you some sealing flanges...
to sandwich some large o rings




.

mcerd1 - 19/2/09 at 01:45 PM

quote:
Originally posted by mangogrooveworkshop
Scott get some really big diameter ali bar and we can turn you some sealing flanges...
to sandwich some large o rings




.


how big do you need ?

I've got some odd bits of 2" and ~4.75"

[Edited on 19/2/09 by mcerd1]