Board logo

what to run a pinto 1.6 on bike carbs on????
*davies144* - 17/3/09 at 09:13 PM

hi just wonderd what would be the best management system to use on my set up?

clairetoo - 17/3/09 at 09:15 PM

Megasquirt

Paul TigerB6 - 17/3/09 at 09:17 PM

MegaJolt - simple answer. Solder your own from a kit for about £50. Buy the Edis 4 bits from a breakers yard for around £35 and maybe £15 for wire. I did a megajolt system and included 5 LED's for the shift lights for around £120 all in on a 2L Pinto (which is having the bike carbs fitted tomorrow)

omega0684 - 17/3/09 at 09:31 PM

i would go for the megajolt route unless you plan to use ITB's, then i would go Megasquirt!

jacko - 17/3/09 at 10:04 PM

modified dizzy from H&H ignition solutions
fit the dizzy and off you go
Jacko

RichardK - 17/3/09 at 10:17 PM

Megajolt, no question.

Cheers Rich