After trawling through the code (msq) in notepad I found that for some reason the nitrous afr table units were in volts instead of afr. Ah well seeing as i've not got nitrous it'll not be a problem.
WARNING(04): Constant "afrBins1" units mismatch, "Volts" in msq, expected "AFR" from ini.
WARNING(04): Constant "afrBins2" units mismatch, "Volts" in msq, expected "AFR" from ini.
Above are 2 lines from my audit log. They were never there before when i was setting the unit up a while back. All i have done since then was to
analize and save it in megalog viewer.
My set up is v2.2 msns extra code 029y3 with itbs ( suzuki gsxr 1000 ITBS) wasted spark and lc1 wideband with controller. Vauxhall redtop 2ltr xe
engine.
As it's been a while since I looked at it/read up on it I was hoping for a quick answer from the informed members of this forum.
Obviously one of the settings is wrong but which one? the ini file or the msq.
Found it.
After trawling through the code (msq) in notepad I found that for some reason the nitrous afr table units were in volts instead of afr. Ah well seeing
as i've not got nitrous it'll not be a problem.