anyone know of somewhere/someone to set my megasquirt in peterborough area i'm getting very pissed off with it hope you can help
Whats up with it?
What engine and set up do you have?
2.0 zetec fz2001 cams gsxr 600 tbs megasquirt 2.5 with edis
Does it run at all.
It would help if you put something in your location - you never know , you might live just down the road from someone who could help
yes runs / drives but not to far also has inovate lc1 o2 sensor i fix cars all day long just don't know about mapping constants etc etc i feel i should have stuck with my crossflow point's/ dizzy and carbs lol.
Best to start with the basic's - what's your fuel pressure set at (should be about 45 psi)
How's your ignition timing ?
What have you set injector events to ? (2 squirts , alternating is a good start)
Req. fuel - start around 8.2 , and adjust fueling on the live tuning screen .
Do you mean megasquirt 2.2 with Edis? if so its very similiar to my set up apart from the cams.Ive just swapped mine to Alpha -N set up from the speed
density i was using before and am in the process of remapping it.It is running quite well so far , if you want to look at my MAP then i can email it
to you when im next using the laptop.
Paul.
quote:
Originally posted by JAMSTER
2.0 zetec fz2001 cams gsxr 600 tbs megasquirt 2.5 with edis
yes paul f if you could do that i would be a help
thanks
jamie
Hopefully it is attached here,
thanks for that how are you getting on tuning yours using alpha n
Ive got it running quite well apart from the common fault of having a snatchy throttle at low speeds due to the throttle sensor not moving enough to
altyer the map at light throttle openings, it is the opposite of the problems I had with speed density.
I also have a speed density map if that is what your using but think you would be better with Alpha n as you have uprated cams.
Paul.
quote:
Originally posted by JAMSTER
thanks for that how are you getting on tuning yours using alpha n
'