Hi,
I have put and ford EFI manifold onto my car.
I have seen a few outputs for what looks like vacumn tubes. One on the top right as look at the manifold from the engine side.
And 2 on the rear. Do I just block these up or do they do anything?

Thanks

Frank

which engine is it ?

Well the engine is a zetec silver top
the manifold came from an escort 1.8 injection

does this help?
thanks

frank

think larger one on right is brake servo take off, one on right front is fuel pressure regulator vacuum, two on rear are one for vacume to emission control and tank vent system, if you have no need for any vacuum taps just blank them




[Edited on 28/11/09 by will121]