ok heres the run down im realy thinking of using a new or post 95 engine in my build and im pritty sure that its possible to get an injection setup
with megasquirt and a cat.
but the thing is im finding it hard to find anyone that has actuly done it
there must be someone that has done it with some kind of programable ecu thats on the market for a start hopefuly some one has done it with
megasquirt
my aim was to build and use megasquirt and a lambda before the cat
just realy want to know its been done befor i getting all the bits together
and yes i know most people are using a older engine and then then changing it over
er, yep, loads of (i'd say most) people on here have/are
[Edited on 15/3/10 by blakep82]
Yep...loads of us have done it, i run a 98 engine with Megasquirt and cat...
tony
quote:
Originally posted by blakep82
er, yep, loads of (i'd say most) people on here have/are
[Edited on 15/3/10 by blakep82]
quote:
Originally posted by t16turbotone
Yep...loads of us have done it, i run a 98 engine with Megasquirt and cat...
tony
quote:
Originally posted by baz-R
quote:
Originally posted by blakep82
er, yep, loads of (i'd say most) people on here have/are
[Edited on 15/3/10 by blakep82]
and passing a cat test for post 94 and iva tests?
how different is iva emissions test to sva emissions test then?
quote:
Originally posted by t16turbotone
how different is iva emissions test to sva emissions test then?
I think you should use what engine you want, if your going to use megasquirt, there are plenty of Megasquirt users on here to help you out when you get confused...which you WILL
I fitted megasquirt to a '95 RF900 Bike engine.
passed SVA on Carbs.
Did not need a CAT tested at 4.5% although I thought at the time it should of been 3.5%
Mine test below 3.5% any way.
I don't think carbs or fuel injection has any thing to do with having a CAT.
It's the age of the engine that matters.
As above many MS fitted to all ages.