Board logo

zetec edis 2.2v megasquirt map needed
doddy - 15/6/10 at 07:21 PM

has any one got a base map or file i can load on to my megasquirt to get the car running well and maybe get it thought the iva on the emmissions

what i have is

megasquirt 2.2v
with code 029y3 loaded

i have a black top zetec running gsxr k1 600 throttle bodies and injectors
with edis
i have a nomal 3 wire lamba sensor also have a aluminum airbox with a cone k&n fiter
im using a 200 cell cat

i have had the car running but thats it it revs up ok
i have set the tps up fine

any help would be great or a map

or am i going to have the car put rolling road and set up that way to get though iva
i dont mine doing that after but i dont have the spare cash now just would like the car on the road

im going to take it for a mot to check before the iva
cheers doddy

mad4x4 - 16/6/10 at 06:29 AM

Get full copy of tunerstudio - the "auto mapping" sorted mine out great need to run int under load though because free reving it has left flat spots.

Have been told but not tried that a wideband lamda sensor will help lots compared to the narrow band one....

[Edited on 16/606/10 by mad4x4]

coozer - 16/6/10 at 09:13 AM

Been running Tunerstudio for a bit and now it wants some cash to carry on!

The VE analyser has gone... WTF!

omega 24 v6 - 16/6/10 at 11:41 AM

quote:

Been running Tunerstudio for a bit and now it wants some cash to carry on!


yep i'm in the same boat.

doddy - 16/6/10 at 04:45 PM

have downloaded tunerstudio will try it at the weekend cheers doddy

paulf - 16/6/10 at 08:43 PM

I have the same setup but with a wide band, I have attached the fuel map.
Paul

paulf - 16/6/10 at 08:44 PM

And this is the ignition map

doddy - 17/6/10 at 03:11 PM

cheers paul will give them a try