Board logo

Blackbird - DTA Base Map Anyone ?
T66 - 16/8/10 at 04:29 PM

Just got myself an s60....


Ive waited a while to get registered on the dta forum, so will try here first.


I have a Rotrex BB engine, and am looking for anyone with a base map ,who is ok with emailing me a copy.


Its just one to get it up and running when the time comes, but of particular interest are those running dta s60 on a blown BB engine.


About as common as hens wee nippers methinks, but worth a go...


Iv0

scootz - 16/8/10 at 04:31 PM

Can't help there Ivan but does that mean the old Blackbird ECU, PC and HISS system are surplus to requirements? Or are you going to hang onto them?

T66 - 16/8/10 at 04:37 PM

The plan is Scott to hoard everything for a short while, till its up and running, then have a sell off of the surplus.

Want first dibs on anything ?


Iv0

big_wasa - 16/8/10 at 05:06 PM

I am a member on there, its not like this forum. Its very slow moving and very little in the way of base maps.

T66 - 16/8/10 at 05:09 PM

Yes its been 3 days since I registered, and I still cannot post yet.


A normally aspirated base map would do for starters.

perksy - 16/8/10 at 05:43 PM

Don't suppose there's a base map on the software you download from the DTA website is there ?

T66 - 16/8/10 at 06:37 PM

quote:
Originally posted by perksy
Don't suppose there's a base map on the software you download from the DTA website is there ?




Only downloads on the DTA website are the drivers/software & manuals etc. The PC software has a Busa & CBR600 but no BB


I still havent had a reply from the forum admin yet, to ask the same question there.

[Edited on 16/8/10 by T66]

imp paul - 16/8/10 at 07:28 PM

i also have a dta s60 run it up with the busa map that's what im doing with my zx 12 turbo and then get it set up from there its just a starting piont but it will get you up and running

[Edited on 16/8/10 by imp paul]

T66 - 16/8/10 at 08:07 PM

Cheers Paul...