Board logo

Megasquirt "Renix" Setting
MakeEverything - 23/1/11 at 08:23 PM

Hi all,

Does anyone know what the "Renix 44-2-2" setting in the ignition settings of tunerstudio is?

I had a thought that may make my wiring slightly simpler by using the existing flywheel pickup point for the ignition.

Engine is a Renault J7R 2.0L

Thankyou.

[Edited on 23-1-11 by MakeEverything]

britishtrident - 23/1/11 at 09:10 PM

It is for the fuel injectors used on certain Renault and Jeep models, if you have normal Bosch pattern injectors you don't need it.

MakeEverything - 23/1/11 at 09:27 PM

quote:
Originally posted by britishtrident
It is for the fuel injectors used on certain Renault and Jeep models, if you have normal Bosch pattern injectors you don't need it.


But its in "Spark Mode" under General Ignition Settings, not Fuel.

Chippy - 23/1/11 at 11:00 PM

quote:
Originally posted by MakeEverything
Hi all,
I had a thought that may make my wiring slightly simpler by using the existing flywheel pickup point for the ignition.
Engine is a Renault J7R 2.0L
Thankyou.
[Edited on 23-1-11 by MakeEverything]


I did this with my V6, just used the exesting trigger wheel and pick up, works fine, even though according to the MS instructions its all in the wrong position. HTH Ray

scudderfish - 23/1/11 at 11:53 PM

Thinking of ditching EDIS then?

martyn_16v - 24/1/11 at 09:16 AM

It's to use the slightly odd trigger wheel pattern a lot of Renaults used to use (the R5GT for example).