Going for a start this afternoon and would like to know whether the standard duratec crank sensor is a high output VR sensor or a normal one - just
trying to determine whether I will need the jumper fitted to account for the high output sensor.
Help appreciated,
Cheers
Andy
[Edited on 23/7/11 by andylancaster3000]
I started my Duratec yesterday with omex and used the standard Ford one with no problems.
HTH
Mark
Thanks for getting back to me mark. Did you have to put a jumper on the ECU pins to account for the VR sensor type?
Cheers
Andy
Andy I am only running on carbs so not too difficult, but the crank sensor would be the same, sorry I cant help on the other bit.
Mark.