Board logo

Map - ST170 with ITB's and VVT using MS3V3.0/MS3X
hiwex - 14/9/11 at 10:23 AM

Hi,
When I destroyed my crossflow, I decided to go the whole way and install an ST170 with GSX-R750 throttle bodies.
Because I want to use the VVT I bought a Megasquirt 3 V3.0 with the MS Extra card installed. All the installation is done, but I know nothing of the murky world of mapping and hope there is someone out there with a similar set-up that might be able to send me a map to get me going.
Cheers
Mike


coozer - 14/9/11 at 11:24 AM

Sorry mate, i'm using an Omex ecu....

Phil at efiextra might be able to help you.

Steve


hiwex - 14/9/11 at 12:01 PM

Thanks Steve, I have tried to contact you through U2U as I stumbled across some of your threads and realise you have a similar setup. I have already spoken to Phil, but thanks anyway.
Cheers
Miek


dunk3 - 14/9/11 at 12:09 PM

Hi Mike , have you tried BaileyPerformance , very good with Megasquirt, give him a ring and he will be more than happy to talk to you about it , here is his number 07967222967.


hiwex - 14/9/11 at 12:40 PM

No, but I will.
Cheers
Mike


BaileyPerformance - 16/9/11 at 09:26 PM

quote:
Originally posted by hiwex
No, but I will.
Cheers
Mike


Hi,

Sorry i keep missing your calls, did call you today, will call again tomorrow.

I have never done a ST170 but have done a Honda Type R in a grass car with VVT and VTEC, both driven from megasquirt with jenvey throttle bodies - worked well and is now a class leader.

Should be no problem to sort your car.

Cheers Dale, Bailey Performance 07967 222967