Board logo

Swirl pot advice
neilp1 - 13/11/11 at 07:47 PM

I've just purchased a 1 litre swirl pot from Alloy Racing Fabrications. It arrived the other day only to find that none of the inlets/outlets are flared!!

Should they be flared or will this be okay??


big_wasa - 13/11/11 at 07:51 PM

It will be fine.

Presure from inlet pump will be <5psi.
There will be little pressure in there as the fuel just returns to the tank.

Use proper hose clips.

[Edited on 13/11/11 by big_wasa]


neilp1 - 13/11/11 at 07:59 PM

Cheers biga_wasa, as I thought but I thought I'd check