Go to MSExtra.com you will find the instructions
[Edited on 22/12/11 by big-vee-twin]
Hi all,
I have inadvertantly deleted the base map on my ms1,just when i was starting
to get somewhere with the tuning.I accidentaly pressed
the wrong button and my engine abruptly stopped.
I have inputted some rough values from an ms2 12x12 table and got it running
again but this is far from ideal.
So,can anyone send me a map that i can load up please?
Dale at Bailey motorsport very kindly sent me a map but it has a 12x12 table
so is no good.
I am running a 2.0 blacktop zetec with ms1.
Any help will be greatly appreciated,as always.
Merry christmas to all the LCB'ers
Cheers,
Andy
Maybe not completely helpful, but log on to Phil's page at extra EFI and download 'extra' version of code with 12x12 tables for MS1.
You will want this anyway, so now is the time to start, it made mine much more driveable.
Do not forget if upgrading to verify the temp sensors.
Regards Mark
You can download tuner studio for free it has base maps which can be burnt to the MS.
You can upgrade the software to full version for around £30 and then it has a full self learning/mapping mode.
quote:
Originally posted by big-vee-twin
You can download tuner studio for free it has base maps which can be burnt to the MS.
You can upgrade the software to full version for around £30 and then it has a full self learning/mapping mode.
Dont need hardware mods but you have to plug in a little jumper while you reload the software, which is inside but very easy to do
Go to MSExtra.com you will find the instructions
[Edited on 22/12/11 by big-vee-twin]
quote:
Originally posted by big-vee-twin
Dont need hardware mods but you have to plug in a little jumper while you reload the software, which is inside but very easy to do
That's it, boot jumper 
this defaults everything so if you have used megatherm to set the temp sensors you will need to repeat.
Things change a little bit in the config dashboard as extra features appear so take 10 minutes to familiarise yourself.
If you have a wideband lambda then you can use autotune, it worked for me well enough for me and is part of MS
Regards Mark
Thanks Mark,i might just give it a go.
i didnt need megatherm as i bought the correct temp
sensors,just to keep it simple while setting up.
Trouble is i have to do it all again now
Andy
You will not need magnatherm if you use tuner studio it can do it for you
Thanks for the help lads
Andy
quote:
Originally posted by lotusmadandy
Hi all,
I have inadvertantly deleted the base map on my ms1,just when i was starting
to get somewhere with the tuning.I accidentaly pressed
the wrong button and my engine abruptly stopped.
I have inputted some rough values from an ms2 12x12 table and got it running
again but this is far from ideal.
So,can anyone send me a map that i can load up please?
Dale at Bailey motorsport very kindly sent me a map but it has a 12x12 table
so is no good.
I am running a 2.0 blacktop zetec with ms1.
Any help will be greatly appreciated,as always.
Merry christmas to all the LCB'ers
Cheers,
Andy
Hi Dale,
Yes i have ms1 with edis.I got sorted with a base map,I'm
going to load it up today and have another go.
Thank you for your offer of sorting out my map,i will need to try
and borrow a tow car and arrange a day sometime in the new year.
I will let you know how i get on.
Many thanks,
Andy
quote:
Originally posted by lotusmadandy
Hi Dale,
Yes i have ms1 with edis.I got sorted with a base map,I'm
going to load it up today and have another go.
Thank you for your offer of sorting out my map,i will need to try
and borrow a tow car and arrange a day sometime in the new year.
I will let you know how i get on.
Many thanks,
Andy