How easy is it to convert a car running carbs to injection.
What would be required.
Matty
method fpor controlling spark and injectors ie megasquirt, trigger wheel, manifold injectors MAF sensor throttle body and filter for a start
Sorry was a bit vague.
I have a fuel injection engine, ecu etc
Just wanting to know if I would need to change the fuel tank or if a swirl pot would be fine and peoples thoughts on best option and way of doing
it.
matty
swirl pot high pressure pump different fuel line for high pressure, swirl pot could be purchased separately yo may also want to fit a low pressure pump
Will need to add a return fuel line too
Depends on the fuel rail setup, some are return less and the pressure regulation happens near the pump at the rear of the car.
Tis like this on my cbr600rr4 TBs..