Board logo

DTA S40 PRO
J90rdn - 17/11/15 at 10:49 PM

Quick Question - For a 2 litre blacktop Zetec, is the DTA S40 PRO a good alternative to an OMEX 600? Both feature wise and ease of mapping. Obviously talking about the fuel and spark ECU and not the ignition only.
Thanks

daniel mason - 17/11/15 at 11:25 PM

Who are you using for mapping?

J90rdn - 17/11/15 at 11:29 PM

quote:
Originally posted by daniel mason
Who are you using for mapping?


Would hope someone could provide a base map to get things going, or I could work out the base map myself, then it would be off to Paul Exon who is about 5 miles from me. When I spoke to his assistant last week he said they mapped MBE and DTA ECU's.

HowardB - 18/11/15 at 07:29 AM

Paul is good,. he did my silvertop,.

very pleased

Rich J - 18/11/15 at 10:44 AM

The DTASwin software has a number of base maps included in the download - 3 of which are Zetec's so you should be able to get up and running at least

daniel mason - 18/11/15 at 12:10 PM

If he uses dta then I'd Definately say dta over omex!
I've had both dta s60 and mbe 9a8 ecu's. The mbe was an easier install as they make suzuki gsxr 1000/1300 looms so plug and play really but the dta has loads of features. The top spec ones can do launch,traction, closed loop flatshifter etc

mini-sprite - 18/11/15 at 12:23 PM

Paul Exon is good but did not have a rolling road. He did the Base map on my DTA managed Redtop mini. He then recommended me to go to Steve Walford who has a rolling road anddid a fantastic job.http://www.swmotorsport.tk/

Paul