Board logo

Which intercooler - Zetec turbo
AndyW - 1/1/16 at 06:59 PM

Hi all

Looking for some info on which Intercooler people are using with a zetec turbo install. I have a standard polo rad and can fit Intercooler in front, and have space over the top for pipe work.

Ta

Andy


coozer - 1/1/16 at 07:28 PM

I had an rx7 one that fitted over the top of my polo rad. Have a look on eBay, they are canny cheap for an uprated Ali job.


coozer - 1/1/16 at 08:12 PM

This one, there's a pic there with measurements for ya...

Mazda RX-7 13B FC3S High Flow Side Mount Alloy Intercooler


mk85 - 1/1/16 at 08:20 PM

Look for the rx7 intercooler on eBay that's what I used


jossey - 1/1/16 at 08:53 PM

Mine has one made by Bailey performance to give me 300hp it 14psi


coozer - 1/1/16 at 08:57 PM

quote:
Originally posted by jossey
Mine has one made by Bailey performance to give me 300hp it 14psi


Got any pics of it?


AndyW - 1/1/16 at 09:03 PM

Thanks guys, the eBay link was one I was watching.


jossey - 1/1/16 at 09:21 PM

This is on a Westy I bought a few weeks back. Yes I still have the tiger I've been building since 1845 haha









[Edited on 1/1/16 by jossey]


big_wasa - 2/1/16 at 01:14 PM

That's a chargecooler rather than an intercooler. Its the way I am going as I have one. How big is your rad to keep temps under control ?

What sort of inlet temps are you seeing after a spirited run ?


jossey - 2/1/16 at 03:02 PM

Rad looks standard I think. Only had the car a few weeks so no chance to get them up yet?

Will let you know in April after Blyton.

Bailey performance did the install before I bought it so I know very little about it.


big_wasa - 2/1/16 at 03:08 PM

You will have two rads up front. One for the engine and one for the charge cooler.


jossey - 2/1/16 at 07:35 PM

Ohhh haha


jossey - 2/1/16 at 07:45 PM