Board logo

Tuner studio daft question?
40inches - 29/4/22 at 05:00 PM

Tuner studio and MS2X
If I wanted to weaken a VE cell, would I input a higher number?

gremlin1234 - 29/4/22 at 06:39 PM

its not a daft question!,
but unfortunately I can't help

Sanzomat - 29/4/22 at 07:22 PM

I believe that bigger numbers in the VE table mean more open time for the injectors so more fuel delivered so richer.

SPYDER - 29/4/22 at 07:38 PM

Lower number to weaken but before you do anything, what are basing your decisions on?
What symptom are you trying to remedy?

40inches - 29/4/22 at 08:03 PM

quote:
Originally posted by SPYDER
Lower number to weaken but before you do anything, what are basing your decisions on?
What symptom are you trying to remedy?

Just trying for a little economy at cruise, around 70mph-ish, A set tps/rpm area of cells?

SPYDER - 29/4/22 at 08:12 PM

I'd leave the VE table alone and use the AFR table to lean out the cruise area. Go easy though. Have you got some ignition advance in the cruise area?