Does anybody know what the Focus ST170 injectors flow. I have searched without any joy. In the end I entered them at 42lbs on the megasquirt.

This was enough to get the car running. I was well chuffed, all was going well then the car died. I treid a couple attempts at starting without any joy and a bit of head scratching I began to worry a bit until I realised I had run out of fuel.


Steve

[Edited on 6/2/06 by Monkeybasher]

If you can get the number off them have a look here
http://www.wolfems.com.au/support/injectorflow

Thanks for the link, however mine don't appear to be there unless I missed them

The part number of mine are 0280 156 095

This is frustating


Cheers

0280156095 are 237.0 g/min @ 3bar and are 14.5 Ohm Impedance

No idea how g/minute relates to cc or lb (although you can calculate the lb) but....

The 42lb/440cc are 326.8 g/min so you are much less than 42lb/440cc.

Mathmatically, yours are 319cc @ 3bar based on (440/326.8)*237

Edit: If you want that in lb's, you are 30.46lb

[Edited on 6/2/06 by the_fbi]

quote:

---

Originally posted by the_fbi
0280156095 are 237.0 g/min @ 3bar and are 14.5 Ohm Impedance

No idea how g/minute relates to cc or lb (although you can calculate the lb) but....

The 42lb/440cc are 326.8 g/min so you are much less than 42lb/440cc.

Mathmatically, yours are 319cc @ 3bar based on (440/326.8)*237

Edit: If you want that in lb's, you are 30.46lb

[Edited on 6/2/06 by the_fbi]

---