Board logo

Uk supplier for megasquirt
I love speed :-P - 28/2/06 at 04:40 PM

At the min i have another project on the go, anyway its got a standard 2 litre silver top zetec with the standard injection system, now i think i need megasquirtnspark extra (v3 board) also with VB921ZVFI Ignition Coil Driver so i dont have to use edis, is this right?

Also is it better to get it from Glen's Garage or from Bill shurvinton and which has the better deliveray times?

Thanks Very Much

Phil Moreton

p.s. is there anything else i need?

[Edited on 28/2/2006 by I love speed :-P]

rayward - 28/2/06 at 04:50 PM

Try

americanv8engines

quick delivery

Ray

stevebubs - 28/2/06 at 05:38 PM

quote:
Originally posted by I love speed :-P
At the min i have another project on the go, anyway its got a standard 2 litre silver top zetec with the standard injection system, now i think i need megasquirtnspark extra (v3 board) also with VB921ZVFI Ignition Coil Driver so i dont have to use edis, is this right?

Also is it better to get it from Glen's Garage or from Bill shurvinton and which has the better deliveray times?

Thanks Very Much

Phil Moreton

p.s. is there anything else i need?

[Edited on 28/2/2006 by I love speed :-P]


Yep - any of the above suppliers - as to who's fastest (Bill vs Glen) - depends on whether Bill has got any in stock or in shipment. Bill would be my first port of call (bought mine from Glen because Bill was on holiday).

Aside from the VB921, you'll need another 330 Ohm Resistor and some suitable wire.

S

I love speed :-P - 28/2/06 at 05:43 PM

quote:
Originally posted by stevebubs
quote:
Originally posted by I love speed :-P
At the min i have another project on the go, anyway its got a standard 2 litre silver top zetec with the standard injection system, now i think i need megasquirtnspark extra (v3 board) also with VB921ZVFI Ignition Coil Driver so i dont have to use edis, is this right?

Also is it better to get it from Glen's Garage or from Bill shurvinton and which has the better deliveray times?

Thanks Very Much

Phil Moreton

p.s. is there anything else i need?

[Edited on 28/2/2006 by I love speed :-P]


Yep - any of the above suppliers - as to who's fastest (Bill vs Glen) - depends on whether Bill has got any in stock or in shipment. Bill would be my first port of call (bought mine from Glen because Bill was on holiday).

Aside from the VB921, you'll need another 330 Ohm Resistor and some suitable wire.

S


Thanks for the replys one more question, where does the extra resistor go?

I love speed :-P - 28/2/06 at 07:01 PM

one more question, sry, is it worth getting the simulator thing?

once again thank you