Hi

I'm about to start making my megajolt, but i'm not sure which way to bend the legs on the transistors

Anyone got a piccy?

Adrian

There should be markings on the board.

Does thjis help http://picasso.org/mjlj/?q=node/497 or this http://picasso.org/mjlj/?q=node/15
It shows the installation of the plastic type transistor that I assume you have.
Paul.

[Edited on 8/3/06 by paulf]

Hi

Its the old board as in your second pic, as i'm fitting it to a pinto i've been using the info on www.cate1.co.uk and his transistors look like there mounted different

http://www.cate1.co.uk/megajolt/pics/board5.jpg

Is it just the middle leg that gets bent back a bit?

Adrian

Its the middle leg that needs to be bent with reference to the markings on the board for the metal case type transistor.
drawing attached
Paul.

quote:

---

Originally posted by ady8077
Hi

Its the old board as in your second pic, as i'm fitting it to a pinto i've been using the info on www.cate1.co.uk and his transistors look like there mounted different

http://www.cate1.co.uk/megajolt/pics/board5.jpg

Is it just the middle leg that gets bent back a bit?

Adrian

---

Rescued attachment PN2222A.gif

Thanks

It all becomes clear

Adrian