Board logo

what ecu
jambo - 29/5/06 at 09:24 PM

hi there i havea 2.0l zetec and a set of r1 injection throttle bodies.
what is best to get to run the engine on a sensible budget
thanks again jamie.


rayward - 29/5/06 at 09:45 PM

megasquirt is the obvious one, lower cost than the others, but will take more time to install/setup.

Ray


jambo - 29/5/06 at 11:52 PM

how much does this cost and do you use the ford zetec sensors


Steve Lovelock - 4/6/06 at 03:36 AM

Hello

Ms1 v3.0 running "extra" code can be had for approx £120-130 depending on where you get it from.

Where and how do you get a Ms1 v3.0 for £120 as they are all £200+ on ebay?


BKLOCO - 4/6/06 at 07:16 AM

You buy it as a kit of parts and build it yourself.


Steve Lovelock - 4/6/06 at 02:23 PM

Well I know nothing about electronics so the difference of £60 / £70 to have one built sounds like money well spent to me; or am I missing something?