CAN ANY ONE TELL ME TO GET AN INLINE PUMP FOR MY BLACKBIRD AS IT NEEDS TO BE 3.5 BAR PRESSURE & 1320CC PER/MIN ACCORDING TO THE MANUAL?
OR CAN I PUT IN A LARGER PRESSURE PUMP? OR WILL THAT CAUSE PROBLEMS???
CHEERS BUT I'VE NOT THE ROOM FOR AN INTANK PUMP TO LOW WOULD RIP IT OUT!!! SO ANY IDEAS ON INLINE PUMP TO SOLVE THIS PROBLEM?
Welcome to the forum,Take the caps lock off your shouting.
The pump I am looking at appears to be able to be removed from all the other stuff around it.
Then your left with something fairly small.
Could be wrong though so maybe just use a Granada EFI pump.
Steve.
[Edited on 29/10/06 by stevec]
I have an inline pump suitable for a blackbird, it was running my blackbird powered car before I turbod it, I also have a fuel preesure regulator.
Andrew
Great what type/make of pump is it & where did you get it at what cost?
quote:
it was running my blackbird powered car before I turbod it. Andrew
He seems to be going just fine! Max power is roughly 320 bhp with his I think, but could be more I imagine!