Hello

Any one out there who can point me in the correct direction of the best way to modify the rail for a return?

Thanks

Hi,

If you call Raceline, they can sell you a boss that can be welded onto the rail, to fit a pressure regulator/return.

Or call me at GTS, and send me the rail and i'll get it done for you.

D.

I brazed in 2 hydraulic male - male adaptors to match the supply and return already in the car, as my fuel rail was missing a feed, but cheap. Mine were from memory one was 1/4 BSP - 1/4 BSP, the other M16 to 1/4BSP. The adaptors were fitted to each end of the rail.

HTH

Cheers,

Colin