I know this has been done to death but have read loads of other threads and just confused myself.....

given the current exchange rate i am thinking of ordering an LC1 off diyautotune.com

I was going to order this:

link

bt just want to be sure that it is the correct item and i won't need any other bits to go with it......

It's to go with my MSnSe v3 pcb setup......

Yes,

This is for the sensor and in cable controller that you connect one of the analogue channels to megasquirt O2 input and 12v power to. The serial cable with the jack plug connector is to allow you to configure the controller to set the AFR - volt range using the application software on the CD provided.

One of the standards to set it to is 0v = 10/1, 5v = 20/1.

Even with the exchange rate as it is I would suggest getting a price from Bill Shurvinton as by the time you've added shipping, VAT, duty & GYP it may be a better bet.

Cheers,

Colin

[Edited on 19/4/07 by CairB]

hi.
That's what you want and the price looks good.

Just check the postage and any import tax you may get charged.

Remember Bill Shurvinton will sell you the same set up for about £145. And he is very helpful and great to deal with.

£135 from bill about 4 weeks ago

quote:

---

Originally posted by ibakes
£135 from bill about 4 weeks ago

---

Yup- see http://www.locostbuilders.co.uk/viewthread.php?tid=64731

cheers all

Well - recieved my LC1 from Bill yesterday....

More complex than i had thought it would be... the setup is bizzare!

now i need to find someone friendly to weld the boss to my exhaust collector...