Those of you running with GSXR throttle bodies what air ramp pipes have you used and where did you get them. also where's the best place to get a ITG sausage filter?

<-- ITG 48mm pipes on my 750 bodies. Purchased from merlin. About £7 ea IIRC

[Edited on 20/4/07 by stevebubs]

I got mine direct from ITG

quote:

---

Originally posted by stevebubs
<-- ITG 48mm pipes on my 750 bodies. Purchased from merlin. About £7 ea IIRC

[Edited on 20/4/07 by stevebubs]

---

Care to elaborate which trumpets / filters you guys are using? had a look at the merlin site and it's very confusing tyrying to work out what I need

http:/ /www.merlinmotorsport.co.uk/ITG-AIR-FILTERS-ITG-Accessories-Airhorns/c432_436_437/p77/BARE-ALUMINIUM-SPINNING-70MM/product_info.html

As it says, ring them.

48mm I/D of something that looks like this...

AH32 is what I used

same here but cheaper direct from ITG

quote:

---

Originally posted by stevebubs
AH32 is what I used

---

excelent - cheers

I used the rubber trumpets off the bike. The GSXR750/1000 uses two different lengths (longer ones on cyls 2 and 3 and stubbies on 1 and 4), I bought two airboxes off ebay complete with trumpets so I had a complete set of four of each length, by the time i'd sold the airboxes back on it'd cost me about 10 quid for the lot

Pics are the 'long' ones...