I am going to use a blade pump in the bottom of my MK tank has any one got any photos of this in place so I can see if the pump sits flush with the tank or if a recess is needed in the tank.

Also the 929 fuel pressure is 43 psi approx does anyone know what the 954 runs at as I can get one of these pumps cheaper.

Thanks in advance

The 929 and 954 pumps both run at the same pressure,but are not the same,ie you could not fit the 929 pump in a 954 tank on the bike the bolt holes are different,but as your mounting yours in your own tank this will not be a problem..
Sorry Ive not got any pictures of mine mounted in the tank,but it was just bolted flush in the base of the tank,I did not have a additional recess/sump in the base of my tank,the standard mk tank is baffled inside,and there is a small sump built into the 929/954 pump,with this set up I had no problems with fuel starvation on the road or track