Board logo

Fuel Pump & Regulator
MKMike - 27/2/08 at 12:14 PM

What fuel pump and regulator do I need?
I'm rumming a 1.8 Zetec with GSXR 600 throttle bodies (injection) in an MK Indy.


matt_claydon - 27/2/08 at 12:24 PM

Any injection fuel pump will work, a common choice is a Bosch like this:
http://cgi.ebay.co.uk/AUDI-80-90-FUEL-INJECTION-PUMP-ALSO-A100-A200-NEW_W0QQitemZ300179585982
They are available with various different inlet and outlet fittings.

As for fuel pressure, GSXR 600 ran 3 bar as standard so you probably want to run the same so the flow rate is as specified (230 or 240cc/min ????)

[Edited on 27/2/08 by matt_claydon]


MKMike - 27/2/08 at 09:08 PM

Does anyone know where to get a 3bar pressure regulator?
Or what car they are standard on?


MKMike - 28/2/08 at 11:07 AM

I'm using Megasquirt, do I need one with a vacuum connection?
Any Ideas on a car that I could get one off?


MKMike - 29/2/08 at 11:16 AM

Do youknow what car the pressure regulatior came off or was it an adjustible one?
Most of the adjustible ones have a vacuum connection