Can someone confirm I have the wiring correct for Ford EDIS. I am a bit confused about the wire colours used - black seems to be power and brwon used for earth!!!

1. blue/yellow - PIP
2. green - IDM
3. blue/red SAW
4. brown
5. blue/yellow - VRS
6. blue/green - VRS
7. brown - VRS screen?
8. black - power
9. brown - ground
10. red/green - coil drive
11. N/C
12. green/yellow - coil drive


the loom I have also has a green/brown wire that goes to the 4 way connector for the coilpack, one end has a tiny cap connector - is this for some soppressor?

the three brown wires are ground - can they all be connected together?

listed here

SUPER DOOPER!! Been looking all day to confirm the collours even though I know the pin outs - gives me a warmer fuzzy feeling ....