Board logo

Now that is an engine...
jimmyjoebob - 2/1/08 at 07:43 PM

This may have already been noticed but WOW!

One hell of a BEC potential


Mr Whippy - 2/1/08 at 07:45 PM

WTF


blakep82 - 2/1/08 at 07:56 PM

i'd expect 48 cylinders to be a bit more powerful than 200bhp... wonder what it sounds like. probably a constant tone


RazMan - 2/1/08 at 07:59 PM

Probably more like mains hum


carpmart - 2/1/08 at 08:00 PM

try and work out the firing order on that baby!


blakep82 - 2/1/08 at 08:01 PM

quote:
Originally posted by carpmart
try and work out the firing order on that baby!




ha ha! remove all his plug leads and watch his face! lol


joneh - 2/1/08 at 08:09 PM

How do you get your legs over it? Mongo fram Blazin saddles wouldn't even fit on it.


Mansfield - 2/1/08 at 08:11 PM

Probably needs 24 exhausts and another load of air filters.

Description
Description


[Edited on 2/1/08 by Mansfield]

[Edited on 2/1/08 by Mansfield]


coozer - 2/1/08 at 08:18 PM

48 2-stroke cylinders. Oh err missus, wouldn't fancy it when it needs a re-bore


bonzoronnie - 2/1/08 at 08:26 PM

Do you think the ole Mega squirt will run that engine.


Ronnie


JoelP - 2/1/08 at 08:27 PM

tell him youd have it if it had equal length exhaust headers


gazza285 - 2/1/08 at 08:28 PM

Ring-a-ding-ding! Probably sounds like poking a stick in a wasp's nest.


Jon Ison - 2/1/08 at 08:30 PM

Ive seen that and heard it running......
















































I told the guy at the time its sounds like its missing on one...........





sure enough, when we pulled plug lead 47 off, no difference.........


speedyxjs - 2/1/08 at 08:31 PM

Isnt that the one that is based on a load of jag e-type engines?


oadamo - 2/1/08 at 08:32 PM

http://www.youtube.com/watch?v=Z90qsAUqB20


Danozeman - 2/1/08 at 08:44 PM

Here you go

youtube

OOOps same vid


What about this for madness

[Edited on 2/1/08 by Danozeman]


Coose - 2/1/08 at 09:06 PM

What it needs it 48 spannies!


zetec7 - 3/1/08 at 05:14 AM

with 48 cyl it'd be smooth, though...and maybe only 200 bhp, but imagine the torque!!! Even if it was missing on one cylinder, it would hardly be noticeable. I don't imagine it's miserly on fuel, though...