flak monkey
|
| posted on 16/1/09 at 07:16 PM |
|
|
The big day tomorrow...
Going to try and fire up the panther for the first time after fitting MS tomorrow morning.
Any hints or tips? 
Just got a couple more things to connect up, and some fuel lines to finish. (About an hours work...)
Sera
http://www.motosera.com
|
|
|
|
|
omega0684
|
| posted on 16/1/09 at 07:20 PM |
|
|
when you get yours done can you come and do mine?
|
|
|
bob tatt
|
| posted on 16/1/09 at 07:22 PM |
|
|
crossed fingers and a fire extinguisher
|
|
|
chris_smith
|
| posted on 16/1/09 at 07:23 PM |
|
|
and then you can come and start my xflow 
The secret of success is to know something nobody else knows."
|
|
|
stevec
|
| posted on 16/1/09 at 07:26 PM |
|
|
If I know you David it will be sweet, but as said keep an extinguisher handy. And be outside.
Steve
|
|
|
nick205
|
| posted on 16/1/09 at 07:26 PM |
|
|
Have a cold beer ready so you can sit back and celebrate
|
|
|
matt.c
|
| posted on 16/1/09 at 08:34 PM |
|
|
Erm? Do the next doors know about this? 
|
|
|
flak monkey
|
| posted on 16/1/09 at 08:46 PM |
|
|
quote:
Originally posted by matt.c
Erm? Do the next doors know about this?
Nope, but sure they will by lunchtime tomorrow...
I'll be under the car port, looks like its going to be chucking it down with rain!
Sera
http://www.motosera.com
|
|
|
Schrodinger
|
| posted on 16/1/09 at 08:56 PM |
|
|
quote:
Originally posted by flak monkey
quote:
Originally posted by matt.c
Erm? Do the next doors know about this?
Nope, but sure they will by lunchtime tomorrow...
I'll be under the car port, looks like its going to be chucking it down with rain!
I would try to start it with the handbrake off so that if it does go pop you can push it out.
Keith
Aviemore
|
|
|
nitram38
|
| posted on 16/1/09 at 09:03 PM |
|
|
Before you start it, disconnect the ign and turn it over and make sure that you have decent oil pressure, because once it starts, if you have none, it
is too late.
|
|
|
rusty nuts
|
| posted on 16/1/09 at 09:10 PM |
|
|
quote:
Originally posted by nitram38
Before you start it, disconnect the ign and turn it over and make sure that you have decent oil pressure, because once it starts, if you have none, it
is too late.
May be a clue in the original post that it a Megasquirt conversion ?
Keep a fire extinguisher handy just in case (for the neighbours) and keep the noise down.
|
|
|
flak monkey
|
| posted on 16/1/09 at 09:32 PM |
|
|
Industrial sized fire extinguisher, and small one both at the ready
I can pressurise the system with my LP pump first, then turn on the main hp pump anyway. Will also have several people around playing spot the leak
Sera
http://www.motosera.com
|
|
|
.jpg)
