adrianreeve
|
| posted on 9/2/09 at 09:40 AM |
|
|
Anyone with a lathe in Kent?
I'm respacing my bike throttle bodies at the moment, and need two small ali spacers turned up. I can get the ali bar, and have drawings, but no
lathe! Is there anyone local who can help? Beer tokens waiting!
Cheers
Adrian
|
|
|
|
|
BenB
|
| posted on 9/2/09 at 10:23 AM |
|
|
If not you could try this person
ebay linky
Rather cheap all things considered.... Hopefully going to get them to modify my crank pulley....
|
|
|
rf900rush
|
| posted on 9/2/09 at 03:42 PM |
|
|
I'm live in Epsom so not mega miles away.
So if you can not find anyone more local I may be able to help.
I had to respace my GSXR600K1 bodies using my Hobby china lathe at home.
What I made was ali spacers plus made 3 shoulder spacers and end caps to block the secondry butterflies once removed.
Also made 2 Stainless bars to replace the long bolts.
Larger picture
Martin
|
|
|
