JAMSTER
|
| posted on 16/6/09 at 07:01 PM |
|
|
megasquirt
anyone know of somewhere/someone to set my megasquirt in peterborough area i\'m getting very pissed off with it hope you can help
|
|
|
|
|
flak monkey
|
| posted on 16/6/09 at 07:08 PM |
|
|
Whats up with it?
What engine and set up do you have?
Sera
http://www.motosera.com
|
|
|
JAMSTER
|
| posted on 16/6/09 at 07:20 PM |
|
|
2.0 zetec fz2001 cams gsxr 600 tbs megasquirt 2.5 with edis
|
|
|
madteg
|
| posted on 16/6/09 at 07:23 PM |
|
|
Does it run at all.
|
|
|
clairetoo
|
| posted on 16/6/09 at 07:27 PM |
|
|
It would help if you put something in your location - you never know , you might live just down the road from someone who could help 
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
|
JAMSTER
|
| posted on 16/6/09 at 07:28 PM |
|
|
yes runs / drives but not to far also has inovate lc1 o2 sensor i fix cars all day long just don't know about mapping constants etc etc i feel i
should have stuck with my crossflow point's/ dizzy and carbs lol.
|
|
|
clairetoo
|
| posted on 16/6/09 at 08:13 PM |
|
|
Best to start with the basic's - what's your fuel pressure set at (should be about 45 psi)
How's your ignition timing ?
What have you set injector events to ? (2 squirts , alternating is a good start)
Req. fuel - start around 8.2 , and adjust fueling on the live tuning screen .
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
|
paulf
|
| posted on 16/6/09 at 08:29 PM |
|
|
Do you mean megasquirt 2.2 with Edis? if so its very similiar to my set up apart from the cams.Ive just swapped mine to Alpha -N set up from the speed
density i was using before and am in the process of remapping it.It is running quite well so far , if you want to look at my MAP then i can email it
to you when im next using the laptop.
Paul.
quote:
Originally posted by JAMSTER
2.0 zetec fz2001 cams gsxr 600 tbs megasquirt 2.5 with edis
|
|
|
JAMSTER
|
| posted on 26/6/09 at 12:34 PM |
|
|
megasquirt
yes paul f if you could do that i would be a help
thanks
jamie
|
|
|
paulf
|
| posted on 26/6/09 at 09:05 PM |
|
|
Hopefully it is attached here,
|
|
|
JAMSTER
|
| posted on 27/6/09 at 06:29 PM |
|
|
thanks for that how are you getting on tuning yours using alpha n
|
|
|
paulf
|
| posted on 28/6/09 at 07:01 PM |
|
|
Ive got it running quite well apart from the common fault of having a snatchy throttle at low speeds due to the throttle sensor not moving enough to
altyer the map at light throttle openings, it is the opposite of the problems I had with speed density.
I also have a speed density map if that is what your using but think you would be better with Alpha n as you have uprated cams.
Paul.
quote:
Originally posted by JAMSTER
thanks for that how are you getting on tuning yours using alpha n
|
|
|
JAMSTER
|
| posted on 6/7/09 at 08:43 PM |
|
|
'
|
|
|
.jpg)
