newton001
|
| posted on 17/6/10 at 04:40 PM |
|
|
05-07 Duratec Ignition Schematic/Question
I'm yank builder just purchased an 05 duratec without computer. It has coilpacks with small gauge wires (not high capacity wires) and no
distributor coils. Want to use MSnS-E for full ignition and fuel management.
I cannot find a schematic of the ignition to determine how the spark is controlled. I am new to the whole EFI thing but from what I have gathered so
far the MSnS-E is not yet fully developed for full individual coil pack control. Anyone fill me in?? A schematic would really help if anyone has one
to share.
|
|
|
|
|
t16turbotone
|
| posted on 17/6/10 at 04:48 PM |
|
|
hi and welcome....
have a look here mate
http://www.extraefi.co.uk/
tony
|
|
|
flak monkey
|
| posted on 17/6/10 at 07:30 PM |
|
|
Easiest thing to do is ditch the COP and find a single coil pack off an earlier duratec.
MSnE wont do COP without additional coil drivers. It may not even do wasted spark depending on your set up and version.
Sera
http://www.motosera.com
|
|
|
