martin62
|
posted on 7/1/11 at 10:39 PM |
|
|
Bike carbs
Just wondering I have a set of gsxr 600 carbs which I was going to fit to a 1.6 pinto but now a change of plans.Would these carbs be suitable for a
2.0l blacktop,if not could someone recomend a set which could be made fit easly.Thanks Aidan
|
|
|
blakep82
|
posted on 8/1/11 at 01:20 AM |
|
|
should be fine yeah. will need re-jetting though, and i think 600cc bike carbs are sort of the bottom end of what to use on a 2 litre engine, R1,
fireblade or zx9r carbs are the most common i'd say
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
whitestu
|
posted on 8/1/11 at 11:14 AM |
|
|
What size are they? I use ZX6 carbs on my 2.0 Zetec and they are about 38mm [r1 carbs are 40mm].
By comparison Webber 40s usually have a venturi size of 32mm.
Stu
|
|
martin62
|
posted on 8/1/11 at 01:47 PM |
|
|
Hi Stu the venturi on mine measures 36.5mm.Aidan
|
|