Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Duratec Crank Sensor Type (for OMEX)
andylancaster3000

posted on 23/7/11 at 12:38 PM Reply With Quote
Duratec Crank Sensor Type (for OMEX)

Going for a start this afternoon and would like to know whether the standard duratec crank sensor is a high output VR sensor or a normal one - just trying to determine whether I will need the jumper fitted to account for the high output sensor.

Help appreciated,

Cheers

Andy



[Edited on 23/7/11 by andylancaster3000]

View User's Profile View All Posts By User U2U Member
Tiger Super Six

posted on 23/7/11 at 02:04 PM Reply With Quote
I started my Duratec yesterday with omex and used the standard Ford one with no problems.

HTH

Mark





Mark

Tiger Avon

View User's Profile View All Posts By User U2U Member
andylancaster3000

posted on 23/7/11 at 02:08 PM Reply With Quote
Thanks for getting back to me mark. Did you have to put a jumper on the ECU pins to account for the VR sensor type?

Cheers
Andy

View User's Profile View All Posts By User U2U Member
Tiger Super Six

posted on 23/7/11 at 02:24 PM Reply With Quote
Andy I am only running on carbs so not too difficult, but the crank sensor would be the same, sorry I cant help on the other bit.

Mark.





Mark

Tiger Avon

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.