madteg
|
| posted on 17/5/13 at 05:06 PM |
|
|
Megasquirt question
How do you turn the lamba feed back completely off,
THanks Kev.
|
|
|
|
|
big-vee-twin
|
| posted on 17/5/13 at 05:15 PM |
|
|
You can choose different EGO sensors in the software - I use tuner Studio.
So in the EGO sensor type choose disabled
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
paulf
|
| posted on 17/5/13 at 08:03 PM |
|
|
I would just turn the setting controller authority to 0 in the EGO settings and active above to 10,000rpm.
You could still log the readings but it will not affect the fuel table.
Paul
|
|
|
dave_424
|
| posted on 17/5/13 at 08:48 PM |
|
|
Tuner studio, basic setting, right at the bottom called EUGO (sp?) control then dissable
|
|
|
coyoteboy
|
| posted on 18/5/13 at 11:20 AM |
|
|
as Paulf said, just give the controller 0 authority and it can't alter anything but will continue to read out.
|
|
|
.jpg)
