Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Megajolt Map RV8 3.9 Weber 500 required.
Irony

posted on 7/7/14 at 04:27 PM Reply With Quote
Megajolt Map RV8 3.9 Weber 500 required.

Does anyone have a known good megajolt map for the above to get me started.

Cheers

View User's Profile View All Posts By User U2U Member
BaileyPerformance

posted on 9/7/14 at 10:28 AM Reply With Quote
HI,

I don't have a map, but use the following to create your own...

The megajolt has throttle position or MAP on the vertical axis, RPM on the horizontal axis. just to get you going you don't need to worry about 3D mapping, just 2D.


1000RPM = 10
1500RPM = 16
2000RPM = 20
2500RPM = 24
3000RPM =28
3500PRM =32
4000-6500RPM = 34

This will be fine to get you running, an will drive fine assuming your carb is setup correctly.

We can setup the carb and megasjolt for £250 on the rolling road.

www.baileyperformance.co.uk

NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.