fha772
|
 posted on 22/7/14 at 04:30 PM |
|
|
Canvas, which wideband lambda and controller?
Hi all,
I'm looking for a wideband lambda sensor and controller, to use with my Canems ecu.
Can anyone suggest what to get, and where from?
Cheers Frank. 
http://www.ppcmag.co.uk/forum/viewtopic.php?f=47&t=6743&start=105
|
|
|
|
|
froggy
|
| posted on 22/7/14 at 05:28 PM |
|
|
Aem for me , had issues with innovate losing calibration . My aem egt probe failed and they sent me a new one no quibbles . I get mine from xenon uk
on eBay , they come from Latvia but have had no issues dealing with them . Aem guage has a digital and analogue scale around the edge so easy to keep
an eye as it is colour coded around the outside . Only slight drawback is the aem lambda probe has a specific plug so the Bosch plug that is on the
sensor that oe cars use won't fit so you have to buy it off aem but not had an issue with mine yet , I place mine a bit further away than the
narrowband sensor
[IMG]http://i144.photobucket.com/albums/r187/froggy_0[IMG]
|
|
|
luke2152
|
| posted on 22/7/14 at 09:21 PM |
|
|
I have an aem - it starts up very quick and can start reading within couple of seconds. The optional guage however is crap, really cheap plastiky and
sticks out so far from the dash that I'll have to remove it for IVA
|
|
|
coozer
|
| posted on 22/7/14 at 09:48 PM |
|
|
I had the Innovate but never had any confidence in it, could never communicate with the lappy but worked with the ecu OK.
Next one for me will probably be the AEM EUGO but last time I looked at that was ages ago so there might well be a newer better solution out there.
1972 V8 Jago
1980 Z750
|
|
|
