Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Fuel sender fitting
furryeggs

posted on 14/11/15 at 09:16 PM Reply With Quote
Fuel sender fitting

How the hell am i supposed to fit my sender into my tank. The insructions say it should bolt from the inside but thats never happening, unless i get my 11 month old to stick her hand into the hole, snap her elbow through 180 degrees and work a ratchet blind.

Can i use self tappers and a silkaflex type sealant???

View User's Profile View All Posts By User U2U Member
Dave Bailey

posted on 14/11/15 at 09:21 PM Reply With Quote
Rivnuts? Or have a boss welded on that is tapped. I did both on my tank... Rivnuts for the in tank pump and a welded boss for the sender....

Dave B

View User's Profile View All Posts By User U2U Member
james h

posted on 14/11/15 at 09:44 PM Reply With Quote
Ali rivnuts for me.
View User's Profile Visit User's Homepage View All Posts By User U2U Member
Smoking Frog

posted on 14/11/15 at 10:14 PM Reply With Quote
Couple of pics here which may help.
Fuel Sender
Fuel Sender

Tank
Tank

View User's Profile View All Posts By User U2U Member
hizzi

posted on 14/11/15 at 10:41 PM Reply With Quote
i made a ring for inside the tank then tapped the holes in the ring, screwed bolts in then passed them up from inside the tank, this left a ring of captive studs sticking up thru the tank for me to fit nuts on the top side
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.