sdh2903
|
 posted on 12/10/16 at 06:37 PM |
|
|
Weber FPR adjustment.
I have a weber adjustable FPR as shown in the picture below. Can anyone confirm how you adjust it? I assume you loosen the nut and turn the Allen
socket? Which way is increase/decrease?
|
|
|
|
|
CosKev3
|
| posted on 12/10/16 at 09:11 PM |
|
|
Screw it in to increase pressure is the usual way.
Why have you gone for an adjustable one out of interest?
|
|
|
sdh2903
|
| posted on 12/10/16 at 09:35 PM |
|
|
The ecoboost specifies a constant 55psi feed to the HP pump which is 3.8 bar. A 4 bar fixed would probably have been OK but wanted to stick to the
spec.
|
|
|
