the_big_1
|
| posted on 23/7/19 at 06:44 AM |
|
|
Fuel Pipe Size
Hi Guys,
Would 8mm fuel pipe be OK to use on a 2.0L Zetec Silver top running the standard injection system?
Cheers,
Carl
|
|
|
|
|
40inches
|
| posted on 23/7/19 at 07:41 AM |
|
|
I use 8mm on the Jag 3litre engine, not a problem
|
|
|
Myke 2463
|
| posted on 23/7/19 at 07:54 AM |
|
|
8mm o/d copper on silvertop with Jenveys no probs. no drop in fuel pressure on RR at 7k.
Be Lucky Mike.
|
|
|
hughpinder
|
| posted on 23/7/19 at 09:29 AM |
|
|
8mm OD should be fine - 8mm bore is good for up to 500 bhp.
http://www.motorsport-developments.co.uk/tech_articles/FAF286_tech.pdf
|
|
|
dellyend1
|
| posted on 23/7/19 at 02:55 PM |
|
|
I've got 8mm on my silvertop and all is working as should be
Hope that helps
Jeremy
|
|
|
the_big_1
|
| posted on 23/7/19 at 04:47 PM |
|
|
Thanks guys!
8mm it is then!!!!
|
|
|
the_big_1
|
| posted on 18/8/19 at 05:11 PM |
|
|
Hi guys,
If you read the article below, they have pipe size as 8mm in side diameter. Most below talk about 8mm outside diameter?
For the 2.0l Zetec on standard injection, should it be 8mm outside or inside diameter?
Many thanks!
|
|
|
