stevebubs
|
| posted on 1/12/05 at 04:26 PM |
|
|
Wiring Diagrams
For Emerald but easily adapted to Megasquirt
here
|
|
|
|
|
rayward
|
| posted on 1/12/05 at 04:28 PM |
|
|
for which engine/car my good man??
Ray
|
|
|
JoelP
|
| posted on 1/12/05 at 04:48 PM |
|
|
my guess is zetec  bit of detective work round his photo archive! 
|
|
|
stevebubs
|
| posted on 1/12/05 at 05:00 PM |
|
|
quote:
Originally posted by stevebubs
zetec but should be generic enough for any car using a wasted spark ignition system, crank sensor and TPS.
When work quietens down, I will be updating the archive to include one that covers a megasquirt installation.
|
|
|
zetec
|
| posted on 1/12/05 at 11:39 PM |
|
|
I would say making up the section of loom for the injection is far easier than farting about with the Ford stalk light switch!
Feed for the injectors which tend to be fired in pairs, 3 wires for throttle pot, 2 each for coolant/crank/air temp, 3 for the coil and poss feed for
pump and fan.
" I only registered to look at the pictures, now I'm stuck with this username for the rest of my life!"
|
|
|
