graememk
|
| posted on 15/3/06 at 09:12 PM |
|
|
ordered my megasquirt today
met paul from peterborough today, the guy seems to know his stuff, well i hope so i paid him lol.
i need a small disk (50mm) to be machined to go in the distributor as a trigger, anyone able to make such a thing ?
|
|
|
|
|
DIY Si
|
| posted on 15/3/06 at 09:22 PM |
|
|
Missing tooth type thing? I can't personally, but any one with a lathe should be able to for you.
|
|
|
big_wasa
|
| posted on 15/3/06 at 09:29 PM |
|
|
Graeme have a look at this Link The guy sells them on ebayfor £20.
This will need mounting to the crank pully. It has to be very acurate as the vr sensor needs to run very close You need very little run out.
Have you got a spare crank pully as I dont mind giving you a hand.
Good artical on doing this in feb Ppc. you will also need a bracket to mount vr sensor.
[Edited on 15/3/06 by big_wasa]
|
|
|
graememk
|
| posted on 15/3/06 at 09:43 PM |
|
|
hiya bigwasa
had a megasquirt guy come over tonight,
i can put the trigger wheel in the ditributor cap as theres a optical sensor in there allready, but i'll need something making up thats 50mm
across and has the grooves in the correct places
as soon as the kit arrives i'll be inviting you over to help me wire it up.
|
|
|
big_wasa
|
| posted on 15/3/06 at 09:46 PM |
|
|
Some one will tell me im wrong but here goes. I would dump the dizzy and go for the crank mounted sensor. Did Paul say if the Nissan sensor would
interface with the megasquirt ?
|
|
|
graememk
|
| posted on 15/3/06 at 09:49 PM |
|
|
hes looking into it tomorrow and i assume get back to me.
i'm still open to suggestion though 
|
|
|
rayward
|
| posted on 15/3/06 at 09:50 PM |
|
|
Definately go for the crank mounted wheel and VR sensor, and if i was you , i'd junk the dizzy and go MSnS aswell.
Ray
|
|
|
big_wasa
|
| posted on 15/3/06 at 10:00 PM |
|
|
looks like I was wrong see link but I wouldnt fancy it
[Edited on 15/3/06 by big_wasa]
|
|
|
graememk
|
| posted on 15/3/06 at 10:03 PM |
|
|
OH MY GOD..... this looks like its going to be fun.............
|
|
|
muzchap
|
| posted on 16/3/06 at 12:43 AM |
|
|
Haha - Paul really does know his stuff ;-)
He'll sort it out - I also have 4 full time Drift kings going onto Megasquirt very shortly :-) They all run 200sx's.
I've known Paul a long time - he will always suggest the most logical option - that's based on best results and minimal fuss.
[Edited on 16/3/06 by muzchap]
------------------------------------
If you believe you're not crazy, whilst everybody is telling you, you are - then they are definitely wrong!
------------------------------------
|
|
|
Kissy
|
| posted on 16/3/06 at 07:12 AM |
|
|
Somebody got contact details for the magical Paul? Ta.
|
|
|
graememk
|
| posted on 16/3/06 at 08:22 AM |
|
|
send muzchap a u2u its his mate
|
|
|
oioi
|
| posted on 16/3/06 at 09:50 PM |
|
|
just ordered mine today too 
its all a bit daunting as i only really hit things with big hammers, but im sure ill get there, with maybe a few squished wires 
ill be using the wheel decoder and a coil pack
That is the Curse of Speed which has plagued me all my life I am a slave to it. On my tombstone they will carve,
"IT NEVER GOT FAST ENOUGH FOR ME." - Hunter S Thompson
|
|
|
