zzr1100rick
|
| posted on 3/4/06 at 07:59 PM |
|
|
zetec ecu pins
Hi got a zetec 60 pin ecu 95 model need to know which ecu pins need power and which are earthed
i know its a bit of a long shot i know pin 20 is earth as for the others ?
cheers Rick
|
|
|
|
|
rayward
|
| posted on 3/4/06 at 08:14 PM |
|
|
any good ??
click me
Ray
|
|
|
zzr1100rick
|
| posted on 3/4/06 at 09:05 PM |
|
|
thanks but no as its not the right year but colours might be the same
where did you get it from ?
iv looked on the net but gave up in the end
|
|
|
andytmc
|
| posted on 3/4/06 at 09:33 PM |
|
|
I worked it out from the Haynes Mondeo manual & a diagram from Andy Hill's web site www.xr2zetec.co.uk. Attached is my updated version -
this is amended to get the fan working and also to prime the fuel pump when the ignition is switched on.
I'v got a list of all the pins I used for the sensor connectors as well but not had time to write it up yet.
Hope this helps
Andy
|
|
|
