zzr1100rick2
|
| posted on 21/12/06 at 12:57 PM |
|
|
MSNSEXTRA
Hi can any one point me in the right direction with settings for my 2.0 zetec with standard injection set up and edis unit i understand that any
settings will need to be tuned to my particular engine cheers Rick
|
|
|
|
|
piddy
|
| posted on 21/12/06 at 07:48 PM |
|
|
Have you thought about trying the default
one in megatune?
You supply some details and it works one out for you.
I looked at the one for my 1800 zetec and it was very similiar to the one I was given by a mega user.
|
|
|
zzr1100rick2
|
| posted on 21/12/06 at 09:29 PM |
|
|
how do i get the default for megatune
|
|
|
TangoMan
|
| posted on 21/12/06 at 10:35 PM |
|
|
The best answer I can give is RTFM!!! 
There are many variables, I have read each of the manuals and am still trying to get my head around it all. I guess it will make more sense when I
actually get to tuning.
The VE table is set in Basic Settings but you will need to go through most of the settings along the top menus. Why not post on the ExtraEFI forum to
see if anyone has a similar setup as a starting point.
Good luck.
Summer's here!!!!
|
|
|
omega 24 v6
|
| posted on 21/12/06 at 10:48 PM |
|
|
On the website www.extraefi.co.uk. at the top of this pagethere is a download site. Click it and
it'll take you to the download area where there are some base maps in a zip file. You'll still need to fine tune from there though.
If it looks wrong it probably is wrong.
|
|
|
piddy
|
| posted on 22/12/06 at 04:30 PM |
|
|
Hi.
To get a default Ve table in megatune:
Select Basic settings(these have to be set first)
Select VE table,Tools,VE specific,Generate table, then enter the CC,Peak torgue,Peak HP,Red line characteristics and OK
|
|
|
