mr zefect
|
| posted on 21/1/07 at 10:58 AM |
|
|
LC-1 wide band sensor help
I have just installed a lc-1 wide band controler and sensor on my ms 2.2 running edis 4 and gsxr 750 k4 tbs on a 20L zetec 18L injectors it was
running very well with the narrow band sens. I just want to no i anyone has a simalar set up and give me some pointers what i have to change in my
settings etc or if some one has a msq file i can use to get started also im using codes mt 2.25beta and mt+spark extra 024s11 is this code a bit old
what is every body else using also im having trouble with my tps sens as it is very close to my bulkhead and after some abusive driving breaks the tps
after using 3 diferent ones im getting fed up with it can i use map insted i have tryed but i had a big flat spot as i pulling away im i doing
something wrong.
|
|
|
|
|
martyn_16v
|
| posted on 21/1/07 at 12:47 PM |
|
|
You're on a hiding to nothing trying to run ITB's with MAP as your load input, trust me i've tried. Can you not protect the TPS a
bit better, either a plate over it to take the dings or maybe move it out of the way (can you flip your tb's over?)
In megatune you need to change the EGO sensor type to wideband (in the exhaust gas settings menu) and change the EGO switch point to whatever the MC-1
outputs at 14.7:1 AFR (probably 2.5v). Then in your settings.ini file you need to set the correct type of sensor under #group LAMBDA_SENSOR
"Lambda Sensor Type".
|
|
|
mr zefect
|
| posted on 21/1/07 at 10:51 PM |
|
|
Thanks mate i will take my tbs to work tomorrow and try to mount the tps some where else. what codes are you using do you think i should change mine.
|
|
|
CairB
|
| posted on 21/1/07 at 11:02 PM |
|
|
Also may be of relevance here
|
|
|
