bigandy
|
 posted on 12/5/07 at 05:28 PM |
|
|
4a-ge fuel pressure regulator
Afternoon folks,
I have just been cleaning up a few parts for my engine install (4a-ge from a Mk1 Mr2) and I am going to be reusing the standard fuel rail, injectors
and I was hoping the fuel pressure regulator that bolts to the fuel rail.
However, it seems that the regulator has corroded a fair amount, so I would like to replace it, ideally with an adjustable one of some sort. The
problem is I have no idea what to look out for when it comes to pressure regulators! Can anyone recommend a decent one that will fit the fuel rail I
already have?
The fitting for the pressure regulator is basically a socket, and two threaded holes. The standard mr2 regulator has a spigot with an O-ring on it.
It (the regulator) is held on by two bolts that clamp a flange to the fuel rail. Does this sound like a standard fitting?
Cheers
Andy
Dammit! Too many decisions....
|
|
|
|
|
graememk
|
| posted on 12/5/07 at 05:30 PM |
|
|
i bought one of these
ebay 230128993589
[Edited on 12/5/07 by graememk]
|
|
|
COREdevelopments
|
| posted on 12/5/07 at 05:38 PM |
|
|
i got a spare standard one for your fuel rail if you would like one?
rob
|
|
|
