02GF74
|
 posted on 2/4/08 at 07:45 AM |
|
|
EDIS - what's with the dodgy colours?!
Can someone confirm I have the wiring correct for Ford EDIS. I am a bit confused about the wire colours used - black seems to be power and brwon used
for earth!!! 
1. blue/yellow - PIP
2. green - IDM
3. blue/red SAW
4. brown
5. blue/yellow - VRS
6. blue/green - VRS
7. brown - VRS screen?
8. black - power
9. brown - ground
10. red/green - coil drive
11. N/C
12. green/yellow - coil drive
the loom I have also has a green/brown wire that goes to the 4 way connector for the coilpack, one end has a tiny cap connector - is this for some
soppressor?
the three brown wires are ground - can they all be connected together?
|
|
|
|
|
ken555
|
| posted on 2/4/08 at 03:43 PM |
|
|
listed here
|
|
|
02GF74
|
| posted on 2/4/08 at 03:53 PM |
|
|
SUPER DOOPER!! Been looking all day to confirm the collours even though I know the pin outs - gives me a warmer fuzzy feeling ....
|
|
|
