omega0684
|
| posted on 27/6/08 at 04:30 PM |
|
|
edis wiring diagrams
hi there guys,
after reading scutters post today about his duff edis module i came across a problem in the diagrams that i had and what he was using, can someone
please advise which of the following is correct?
 
as you can see the wiring the the coil pack is different. mine is wired up like the one on the left
cheers
|
|
|
|
|
clairetoo
|
| posted on 27/6/08 at 04:37 PM |
|
|
Wont make any difference as far as I can see - it's just 1/4 and 2/3 plugs will be swapped around .
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
|
RichardK
|
| posted on 27/6/08 at 04:43 PM |
|
|
I used the picture on bottom when doing my megajolt and seems ok.
Rich
Gallery updated 11/01/2011
|
|
|
graememk
|
| posted on 27/6/08 at 05:13 PM |
|
|
i used the bottom one
|
|
|
big_wasa
|
| posted on 27/6/08 at 06:00 PM |
|
|
Bottom one looks correct 
|
|
|
scutter
|
| posted on 27/6/08 at 06:03 PM |
|
|
Just to confuse the issue, been out and checked, mines running the top picture.
ATB Dan.
The less I worked, the more i liked it.
|
|
|
David Jenkins
|
| posted on 27/6/08 at 06:32 PM |
|
|
I used the bottom one with my Megajolt. As said above - it just means that you have to swap the plug lead pairs (mine match the legend on the coil
after using the lower drawing).
|
|
|
ChrisW
|
| posted on 27/6/08 at 07:03 PM |
|
|
It won't be a problem, as has already been said.
If it's round the wrong way, just swap the plug leads over.
Chris
|
|
|
David Jenkins
|
| posted on 27/6/08 at 07:25 PM |
|
|
Interesting - the Autosport Labs (Megajolt) website now has the following diagram:
You can see in the top one that it agrees with the top diagram in the original post!
I'm confused...
|
|
|
omega0684
|
| posted on 27/6/08 at 09:12 PM |
|
|
you see this is where im now confused, does it or doesn't it matter. im going to change mine to the second (the one on the right hand side) as
that seems to be the majority rule.
|
|
|
clairetoo
|
| posted on 27/6/08 at 09:34 PM |
|
|
It really dose'nt matter - at the end of the day all your doing is fireing two coils connected to four plugs................which way round they
are connected makes no difference at all (hence the different diagrams....)
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
|
Krismc
|
| posted on 28/6/08 at 11:21 AM |
|
|
yea i wired up using the top digram and my engine ran but lumpy as hell, then stopped.
it took me ages to work out the diagram was wrong.
used bottom and it worked fine
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
