Steelman
|
| posted on 14/10/08 at 07:37 AM |
|
|
Aftermarket ECU with variable valve timing control option
Has anyone fitted a aftermarket engine management system with a variable valve timing control option on it. I am fitting a nissan 300zx z32 V6 into a
Luego Viento.
|
|
|
|
|
tonym
|
| posted on 14/10/08 at 07:47 AM |
|
|
VVT
Yes I have an Omex ECU on a Toyota Vvt 20v engine. Just use the shift light facility to operate the Vvt. This probably applies to most other ECU
makes out there.
HTH
tony
|
|
|
bimbleuk
|
| posted on 14/10/08 at 08:11 AM |
|
|
The OMEX ECUs can do infinite variable VVT as well. Not specifically listed on the ECU spec but basically you use a pulse width auxillary output to
give you the variable control.
|
|
|
PAUL FISHER
|
| posted on 14/10/08 at 09:36 AM |
|
|
"chris mason" on this forum fitted a stand alone ecu on his s2000 Indy to control the variable valve timing/vtec,I think it was a
"hydra" system,it brought the vtec in lower down the rev range,so the power came in a bit softer,to make it more driveable.
|
|
|
Ham
|
| posted on 14/10/08 at 10:50 AM |
|
|
Check out www.gotech.co.za used by plenty here in SA good back up and fairly priced
Cheers
|
|
|
